The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-07-2018, 09:48 AM

The pictures of the 71 gas pedal with the rod has to have the mounting parts to the fire wall inside the cab to work. It's the pivot point for the pedal. I took my factory 71 gas pedal out and used the Lokar gas pedal assembly, brake pedal and e brake in my 71.
You can see the GP mount in the picture and it's much smoother operation since it's ball bearings.

12-07-2018, 09:48 AM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Accelerator pedal question The pictures of the 71 gas pedal with the rod has to have the mounting parts to the fire wall inside the cab to work. It's the pivot point for the pedal. I took my factory 71 gas pedal out and used the Lokar gas pedal assembly, brake pedal and e brake in my 71. You can see the GP mount in the picture and it's much smoother operation since it's ball bearings. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.