Re: S10 Swap how to
awesome news! glad to hear it chris
Mains52, I have hung a motor and trans in the hole using a cherry picker, jacks, and holding my tongue right to weld in mounts. level the frame first, then level the motor 4 degrees down towards the rear. keep a little offset to the passenger side (use the oval holes on the top of the s10 frame to the cast line on your trans) and keep the motor straight in the frame. by the time you set everything where it needs to be, you can tack in your mounts.
Last edited by joedoh; 05-04-2017 at 02:20 PM.
|