The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1966 C20 deluxe heater controls face color fawn or black?

64jmb · 05-03-2017, 04:47 PM

Here is a good story for ya.. I totally understand what you are going through.. I did not do my homework on my disc brake set up in the front.... the front springs on my truck were cut... 1.5 coils which is about 3.5 to 4 inches off the spring... set the whole thing up what the stock standard spindles woooops! They were cut so far that now I cannot set the camber with the stock no drop spindles! I have to install new coil springs in the front now with just a 1 inch drop in the spring and buy new 2.5 drop spindles this time reinstall everything to the tune of about $900 OUCH! Then it will be correct for both tow and camber.... I should have researched it more...

05-03-2017, 04:47 PM	#12
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	Re: 1966 C20 deluxe heater controls face color fawn or black? Here is a good story for ya.. I totally understand what you are going through.. I did not do my homework on my disc brake set up in the front.... the front springs on my truck were cut... 1.5 coils which is about 3.5 to 4 inches off the spring... set the whole thing up what the stock standard spindles woooops! They were cut so far that now I cannot set the camber with the stock no drop spindles! I have to install new coil springs in the front now with just a 1 inch drop in the spring and buy new 2.5 drop spindles this time reinstall everything to the tune of about $900 OUCH! Then it will be correct for both tow and camber.... I should have researched it more...