Re: Calling “57ChevyMan” - Bed Assembly Questions
Just a few measurements I made when I drilled my bed wood hope this helps Dan
BED WOOD
Mounting Holes drilled are measured 2 3/4 from inside edge out to fender
1st hole = 4 3/4 x 2 3/4 nearest rear cross sills
2nd hole = 23 1/2 x 2 3/4
3rd hole = 50 1/2 x 2 3/4
4st hole = 74 1/2 x 2 3/4 front near cab
|