|
Re: 2001 3500 Dually Lowering ?
Quote:
Originally Posted by 77c10bowtie
several companies make lower control arms that lower the front, better than spindles. spindles take your tierod angle way out of spec and cause some weird steering when towing. the 1999+ trucks have torsion bars so they wont have coil springs so imo the best option is a lower control arm.
i have DJM lower control arms that dropped the front end 3" on my 2500HD
for the rear i did shackles and hangers, id start with shackles first though and decide how low you wanna go.
|
My bad..... I have a '99 3/4 ton & was thinking the suspensions were the same through '01 on the HD trucks.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|