The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 07-26-2014, 08:08 PM

Inspect Low/Reverse clutch "Steels" for bluing "hot spots", Replace if necessary.

Inspect Reaction Sun Gear for damage, If the planet had damage...The Sun Gear most likely got damaged as well. Replace Bushing 100%, High wear area. Wide Sonnax Bushing is preferred.

Remove Inner Race from Center support, Inspect the Low/Reverse Sprag inner race for damage, Replace the Low/Reverse Sprag 100%....Borg Warner Only! This Sprag is technically a Roller Clutch.

07-26-2014, 08:08 PM	#41
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: 700R4 build thread. Inspect Low/Reverse clutch "Steels" for bluing "hot spots", Replace if necessary. Inspect Reaction Sun Gear for damage, If the planet had damage...The Sun Gear most likely got damaged as well. Replace Bushing 100%, High wear area. Wide Sonnax Bushing is preferred. Remove Inner Race from Center support, Inspect the Low/Reverse Sprag inner race for damage, Replace the Low/Reverse Sprag 100%....Borg Warner Only! This Sprag is technically a Roller Clutch. Attached Images Last edited by clinebarger; 07-26-2014 at 08:20 PM.