View Single Post
Old 05-14-2018, 04:07 PM   #1
C10_ustacould
A day late and $1 short...
 
C10_ustacould's Avatar
 
Join Date: Dec 2008
Location: Northwest FL
Posts: 3,870
Wilwood 4 wheel disc squeaking/chirping issue

We just completed a 4 wheel disc conversion using a Willwood 15/16" bore master cylinder, Wilwood D52 front calipers with stock rotors, and Wilwood D154 rear kit. All the lines and hoses were also changed. As the brakes warm they start to squeak or chip if that's understandable. It's not the loud sqeal that's sometimes associated with performance brakes and/or brake pads it sort of wavers. Here's where it gets weird, they all make noise at some point but rarely at the same time. If I hear the right front making noise I can turn just slightly to the right to stop it, but the left will then start making noise. Turn to the left and it swaps back. I know... weird right? The same with the rear but it seems to be tied to body roll. As the truck body rolls towards the right, the right rear will start making noise. The same occurs when it rolls to the left. It's crazy! Has anyone had this issue?
__________________
Buck

Instagram: C10_ustacould

1963 SWB Fleet Side 528 Desert Beige
Milly

1967 SWB Step Side 506 Medium Blue
The Old Girl

1968 SWB Fleet Side 503 Light Green
Ellie SOLD

1965 SWB Fleet Side 507 Light Blue
Prescription Strength SOLD

1971 SWB Fleet Side 521 White
Shiro SOLD

1968 SWB Step Side 503 Light Green
My Old Farm Truck SOLD
C10_ustacould is offline   Reply With Quote