|
Re: Replaced pinion seal but did I do it right?
Interesting. I've rebuilt probably 30 different axles and I don't think any of them would let me get the front pinion bearing out without driving the pinion. Maybe some of the absolutely worn out ones. Some of them require absolutely hammering the F out of it. Put the nut on a few turns and use a 3/4" brass drift to drive in the center of the pinion until it slips. Then you can remove the nut and the pinion.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
|