HUNTER'S 1978 GMC C15 SIERRA BUILD THREAD
It's crazy looking back on this thread, seeing how fast it makes things go by when a lot of these processes took days and sometimes multiple weekends.
The next patch wasn't entirely necessary however the panel was really beat up and there were tiny rust holes and "pock marks" throughout the area from the surface not being appropriately prepared for the bondo. This area still needs some hammer and dolly work but it's better off with this patch for sure.
We replaced both the inner part of the fender, outer, and a couple of areas inside of the bed. We found that the door patch we had used earlier had the same bend.