[Bdb68]

Some recent progress, I worked on the axles some. I replaced all 4 rotors, 4 calipers, new pads all around, new shoes for the e-brake, and backing plates for the rear axle (these parts cost more then I paid for both axles). Got the axles cleaned up and painted. Hooked the break lines up using the Chevy hoses I had just put on a few months ago. We got the brakes bled, and the old driveshaft slid into place, it is too long but did not quite bottom out in the transfer case. Drove the truck out of the garage, turned it around and drove it onto the 4 post lift.