[mikentosh]

Now that the chassis is a roller, and after one last drive, it was time to start the tear down and swap over.

Something I don't think has been previously mentioned is we are converting the cab over to factory air conditioning. This required tearing apart everything under dash as well. This was also a good time to prep for hiding the MSD boxes.

I'm running a MSD 6AL spark unit in this project so eventually I can have ignition timing controlled by the Atomic EFI. I found a good place for the 6AL box mounted to the side of the brake pedal box, and the long extension on the throttle pedal bracket made a perfect place for mounting the Atomic EFI power module.