The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

CSHADES · 12-21-2017, 10:57 AM

used the truck last week for the first time this plow season. Had a few issues, luckily it was a very small amount of snow because I could not get the shifter for the transfer case to move. So I pulled the shifter out and disassembled it. Cleaned and lubed everything with a marine grease then reinstalled it. Works better than it has in a long time. I also had some issues with the plow controls for up and down. I have a few old controls that I have bought at the swap meets, I installed one of those and adjusted everything cable and valve wise, it seems to work very well. I guess we will find out the next time it snows.

12-21-2017, 10:57 AM	#91
CSHADES Registered User Join Date: Nov 2015 Location: portage wi Posts: 502	Re: Rebuilding my 1977 plow truck used the truck last week for the first time this plow season. Had a few issues, luckily it was a very small amount of snow because I could not get the shifter for the transfer case to move. So I pulled the shifter out and disassembled it. Cleaned and lubed everything with a marine grease then reinstalled it. Works better than it has in a long time. I also had some issues with the plow controls for up and down. I have a few old controls that I have bought at the swap meets, I installed one of those and adjusted everything cable and valve wise, it seems to work very well. I guess we will find out the next time it snows.