The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sleipnir · 04-09-2018, 05:47 PM

Ok guys I currently have a 250 mated to a Saginaw from a car. In fourth gear (no overdrive) going 60 mph my rpm is about 3200. I'm running a 28 inch tall tire but from what I'm seeing online I have a 4.56 in the rear. Does that sound right? It's a lwb 67 c10. I checked the numbers on the rear end and it days it came with a 3.73. I hope I can put a lower gear in and it's a 4.56 because highway driving is terrible right now.

04-09-2018, 05:47 PM	#1
Sleipnir Registered User Join Date: Oct 2017 Location: Seguin, TX Posts: 89	Need help figuring out rear end gear Ok guys I currently have a 250 mated to a Saginaw from a car. In fourth gear (no overdrive) going 60 mph my rpm is about 3200. I'm running a 28 inch tall tire but from what I'm seeing online I have a 4.56 in the rear. Does that sound right? It's a lwb 67 c10. I checked the numbers on the rear end and it days it came with a 3.73. I hope I can put a lower gear in and it's a 4.56 because highway driving is terrible right now. __________________ 67 C10 "Big Red"