The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 01-28-2019, 06:00 PM

Started to get the speaker installed I used a 5x7 dual voice coil retro sound speaker. I picked up a half-inch thick foam board from Hobby lobby and some black polyester material.
The speaker is directional as you can see in one of the pictures the tweeters are at an angle I am assuming that it’s supposed to be that way.
I forgot to take a picture after I covered the speaker and foam.i did get a shot when testing from the top of the dash down.
I did have to get polish out from between the slots in the dash.
I will get a picture from under the dash to show the room or lack of between the speaker, stereo, and AC vent.

01-28-2019, 06:00 PM	#767
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Started to get the speaker installed I used a 5x7 dual voice coil retro sound speaker. I picked up a half-inch thick foam board from Hobby lobby and some black polyester material. The speaker is directional as you can see in one of the pictures the tweeters are at an angle I am assuming that it’s supposed to be that way. I forgot to take a picture after I covered the speaker and foam.i did get a shot when testing from the top of the dash down. I did have to get polish out from between the slots in the dash. I will get a picture from under the dash to show the room or lack of between the speaker, stereo, and AC vent. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!