|
Re: cranks but no spark - tough problem for you
so..........
Unfortunately not the end of the story. I've been travelling a bit for work, so I haven't had huge amounts of time to work on it. After getting the new ground strap in and the grounds under the drivers door soldered on I took it for a ride around town.
About 5-6 miles in I get an ABS light and a needs brake service message where the odometer usually is. Check the codes and it has lost communication with the ECU. A few min later I get the ding ding ding warning. I look down and see the battery light is on and the oil pressure, fuel level gauge, and the water temp gauge are all on the pin like the ignition is off. A few seconds later and they jump back to life.
Pretty sure this is why the mechanic couldn't get the ECU to program. Clearly I've got more wiring issues to sort out.
Kelly
|