Re: intro + 66 black bagged long fleet
Quote:
Originally Posted by ScrapinRollPan19
do you have any clearance issue between frame and trailing arms? im currently baggin my 66 and didnt know if you had to build a long notch for the arms to clear or not
|
well i built my notch so that it wouldnt lay frame..my rear end hits on the bottom of the notch just before the frame touches the ground. right now the crossmember is holding it up but im gonna either buy one or make one.. not sure yet.. but anyway once i get a different crossmember it should have the frame bout 1/2 inch off the ground or so and still have a lil clearance for the trailing arms..btw i made some 3 3/4 inch drop blocks... you have to have that to get the clearance otherwise the trailing arms will hit the frame
Last edited by coulter; 03-07-2011 at 08:29 AM.
|