Re: New Paint
I will have to double check the tire sizes. The drop kit used 1 1/2 inch lowered spindles and (i think) 3 inch lowered coil springs. The rear was a 4 inch dropped coil only. I also relocated the shock mounts and added a longer tie rod bar that attached farther down the rear housing instead of the stock location.
It really is as low as it can go without a C notch on the frame.
The wheels are just 15 inch corvette rally wheels so nothing special there. I forget the width of the rims, but I had to buy a narrower set for the front because the other rims and tires on the front hit the wheel well.
|