Quote:
Originally Posted by hemi43
Adding body shims at the mounts located near the rear of the door should help. Removing shims from the front mounts by the firewall could help also. Before doing any of this, any bolts holding the fenders on should be loosened off. This is a fairly big job because once the front cowl has been moved (rotated) forward, your doors and fenders will have to be realigned for proper gaps.
|
I have everything loose to the headlights that I think would affect the movement. I figured it would take some time and patience but windshield header wont move. I will take out the two front body shims and see what happens. I have lifted, lowered shimmed and re shimmed only to have been lucky enough to break the pass side glass and chip paint. should I pull the front end and start from scratch.
Thanks for response and nice build by the way