The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

INSIDIOUS '86 · 04-24-2013, 08:20 PM

Here's the little 305. Still has cross hatching in the cylinder and the insides are pretty clean. It was pulled running out of my freinds iroc but it leaked oil everywhere. The prev owner didn't use spreader bars on the valve covers or spreader bars on the oil pan. The cam and lifters were factory and in awesome shape ( may save those for my 283 tpi project) but the cam gear had 90% of the nylon broke off. So I have a cloyed true roller going in with the summit cam so far for a free engine I'm not complaining

Posted via Mobile Device

04-24-2013, 08:20 PM	#4
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: 78 gmc heavy half stepside project Here's the little 305. Still has cross hatching in the cylinder and the insides are pretty clean. It was pulled running out of my freinds iroc but it leaked oil everywhere. The prev owner didn't use spreader bars on the valve covers or spreader bars on the oil pan. The cam and lifters were factory and in awesome shape ( may save those for my 283 tpi project) but the cam gear had 90% of the nylon broke off. So I have a cloyed true roller going in with the summit cam so far for a free engine I'm not complaining Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 Last edited by INSIDIOUS '86; 04-24-2013 at 08:32 PM.