The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Bracket dimensions for stock '65 radio and speaker?

Praxiss454 · 05-19-2017, 03:41 PM

Now that I have a bench vise I can actually start bending some sheet metal. Figure I'd ask for one more try if anyone can take some photos and measurements, or at least point me to some good photos that show how the radio and speaker are mounted?

Might be a long shot, but would appreciate it. Depending on what I'm able to find, I could try to create a sheet metal template in CAD and post it here for others to use.

05-19-2017, 03:41 PM	#3
Praxiss454 Registered User Join Date: Jun 2016 Location: Novato, CA Posts: 519	Re: Bracket dimensions for stock '65 radio and speaker? Now that I have a bench vise I can actually start bending some sheet metal. Figure I'd ask for one more try if anyone can take some photos and measurements, or at least point me to some good photos that show how the radio and speaker are mounted? Might be a long shot, but would appreciate it. Depending on what I'm able to find, I could try to create a sheet metal template in CAD and post it here for others to use. __________________ 1965 GMC 1000 SWB Fleetside L6 230 - SOLD Thanks everyone for the help over the years.