Re: My nv4500 swap then doubler ol' black
The install was to:
Unbolt np205 then;bolt up np203 box with doubler adapter to nv4500 then bolt np205 back in .
The rear crossmember that originally only held the back of the skid plate was now going to support the doubler mount with the poly foot mounts I took out originally from the nv4500 swap and newer style mount.
I had to move rear crossmember closer to front crossmember drill new holes in frame then tied it alltogether with the modified skid plate.
Super strong setup!
Then add new boot, shifter and linkage.The rear driveshaft went back to the same shop for a couple of hours to be shortened 9" and balanced again , the pto shafts were modified accordinally also.
New Low range ratio is 100.7:1 WOW!
|