[Aberdare]

Well, another Monday and another week with time for projects. Today I fabricated the left side step and got it tack welded into place. I also folded over the left side of the floor over the top edge of the step. I had some time left over in the afternoon, with the assistance of the lads in the workshop, to hoist the original roof panel back on top. Two dozen bolts holding it on, and 1st time's the charm... it went on straight with no adjustments required. The next step will be to prepare the rear door header section. It will require some extensive fabrication before it will fit back into place and weld it to the new rear floor.

... Check it out!