The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68gmsee · 03-02-2010, 12:31 PM

On one of my books it shows the M and MV series vary between 9/32 to 11/32 from the top of the casting to the top of the float with the tang on top of the needle valve depressed. That's should be a good start.

03-02-2010, 12:31 PM	#5
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Carb Help On one of my books it shows the M and MV series vary between 9/32 to 11/32 from the top of the casting to the top of the float with the tang on top of the needle valve depressed. That's should be a good start.