The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

05crewcab · 11-16-2010, 08:05 PM

yeah, fuse block and fuse panel are the same thing. on the fuse panel, there are two spade terminals marked "ign. unfused" use one of those for your new red (or whatever color you like) wire. I have mine snaked through one of the firewall grommets near the steering shaft from inside the cab to the engine bay. it's the top light blue wire in the pic below(the bottom blue one is for my electric choke and tach):

11-16-2010, 08:05 PM	#13
05crewcab Registered User Join Date: Mar 2010 Location: Minnetonka, MN Posts: 409	Re: HEI and Starter wiring? yeah, fuse block and fuse panel are the same thing. on the fuse panel, there are two spade terminals marked "ign. unfused" use one of those for your new red (or whatever color you like) wire. I have mine snaked through one of the firewall grommets near the steering shaft from inside the cab to the engine bay. it's the top light blue wire in the pic below(the bottom blue one is for my electric choke and tach): Attached Images __________________ 1971 C-20 350/350