The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rewired 70 C10 heater and running lights on even if ign is not plugged in.

C10Coloradoguy · 09-04-2017, 04:40 PM

Thanks OUbesto,

I have talked to AAW once and the gentleman I talked to steered me in a direction which allowed me to figure out a few things on the harness. The thing that is stumping me right now are the turn signals. All of the other lights work and don't blow fuses. Both left and right, front and back refuse to flash and blow the turn signal fuse everytime the switch is pushed right or left and the hazard blows as soon as you push the red knob. The running lights WORK all the way around. How can the turn signals be grounding or shorting when the other wires on all of the bulbs appear to be carrying current just fine?

09-04-2017, 04:40 PM	#40
C10Coloradoguy Registered User Join Date: Jul 2017 Location: Highlands Ranch, CO Posts: 39	Re: Rewired 70 C10 heater and running lights on even if ign is not plugged in. Thanks OUbesto, I have talked to AAW once and the gentleman I talked to steered me in a direction which allowed me to figure out a few things on the harness. The thing that is stumping me right now are the turn signals. All of the other lights work and don't blow fuses. Both left and right, front and back refuse to flash and blow the turn signal fuse everytime the switch is pushed right or left and the hazard blows as soon as you push the red knob. The running lights WORK all the way around. How can the turn signals be grounding or shorting when the other wires on all of the bulbs appear to be carrying current just fine?