Quote:
Originally Posted by 61K10
the pic of your starter you have it,s grounded to the eng (jumper cables) and + from battery to + on the sol and jumper on the s terminal. Take the s term wire and touch it to the + batt and the starter will spin. starter is tested.
sorry if you know all this already.
here is a 61 wiring diagram
|
Starter is fine IMO. It turns over and the truck will run when jumped. It will also turn over on its own right after being jumped and when the cables are off. It is when I let it sit, it doesn't have any power.
I just replaced the starter as well last week with a new one from the store. It may be a noob assumption, but I'm thinking the starter is good.