The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67' C10 Build V8 Conversion & 700r4 trans

westgl · 02-02-2012, 11:26 PM

Here are some pics of the Frame & body after it was cleaned a little moe.

After Cleaning the firewall, I'm thinking that I am going to paint the firewall 20% semi gloss black, same as the Frame, since it did not clean up as well as i would have like it.

besides the Black paint will hide a lot of crap.

Lets see if anyone is actually out there.

In the picture, is a Trans Mount for the Manual 3-speed from the I6 250ci engine & trans that was pulled out.

Question is: Can that be used as a Front Trans mount, for a 700r4, I have a rear trans mount from ECE ?

02-02-2012, 11:26 PM	#63
westgl Registered User Join Date: Oct 2009 Location: Central Point, Oregon Posts: 166	Re: 67' C10 Build V8 Conversion & 700r4 trans Here are some pics of the Frame & body after it was cleaned a little moe. After Cleaning the firewall, I'm thinking that I am going to paint the firewall 20% semi gloss black, same as the Frame, since it did not clean up as well as i would have like it. besides the Black paint will hide a lot of crap. Lets see if anyone is actually out there. In the picture, is a Trans Mount for the Manual 3-speed from the I6 250ci engine & trans that was pulled out. Question is: Can that be used as a Front Trans mount, for a 700r4, I have a rear trans mount from ECE ? Attached Images __________________ 1967 Chevy C10 Lwb I6-250ci 3spd manual trans Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar, Last edited by westgl; 02-02-2012 at 11:42 PM.