The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Joyridin · 09-18-2023, 10:07 AM

If you missed the pin, everything will still rotate like normal, but the cam will be out of alignment with the cam phaser. The dots will still be inline on the timing chain/gears.

Rotate the engine and set piston #1 at TDC. Both valves should be closed if you are on compression stroke. If not, the cam is off location.

09-18-2023, 10:07 AM	#4
Joyridin Registered User Join Date: Sep 2020 Location: Cleveland, Ohio Posts: 485	Re: L83 Won't Start after DOD Delete If you missed the pin, everything will still rotate like normal, but the cam will be out of alignment with the cam phaser. The dots will still be inline on the timing chain/gears. Rotate the engine and set piston #1 at TDC. Both valves should be closed if you are on compression stroke. If not, the cam is off location.