The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**fredm98** · 01-22-2012, 05:57 PM

I bought a stepside fender from fellow board member JJanzen recently and was very impressed by the packaging. With his permission, here is how he shipped it. Hopefully it is useful info for someone else. I forgot to get the exact measurements, but the total weight was 57lbs. Price of course would vary, but from Denver to Sioux Falls, Fedex charge was about $78.
Basically it is a wood crate made of 1x6s covered with cardboard for protection. The fender attaches to the "lid" with carriage bolts, and the lid is held on with screws. It stands upright nicely and is pretty easy to carry that way.

01-22-2012, 05:57 PM	#1
fredm98 Active Member Join Date: May 2009 Location: Sioux Falls, SD Posts: 110	How to ship a stepside fender I bought a stepside fender from fellow board member JJanzen recently and was very impressed by the packaging. With his permission, here is how he shipped it. Hopefully it is useful info for someone else. I forgot to get the exact measurements, but the total weight was 57lbs. Price of course would vary, but from Denver to Sioux Falls, Fedex charge was about $78. Basically it is a wood crate made of 1x6s covered with cardboard for protection. The fender attaches to the "lid" with carriage bolts, and the lid is held on with screws. It stands upright nicely and is pretty easy to carry that way.