The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**8man** · 07-03-2018, 07:40 PM

It takes practice, or so I've been told. I'm learning after 40 years behind a desk, this is my "meditation". Just remember, my 86 year old dad has told me so many times, "it's just metal, if you don't like what you did, cut it out and do it again." In fact, some of the guys on this forum have told me the same thing.

There are different "fillers". I'm going to use Evercoat Quantum 1 for a finish filler, and Evercoat Everglass as the "filler" for the larger spots. I've been researching them and they seem to be pretty good.

Also, remember to prime before filler. Filler will trap water. Just a thought.

Keep up the good work.

07-03-2018, 07:40 PM	#118
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,276	Re: '50 chevy 3100 It takes practice, or so I've been told. I'm learning after 40 years behind a desk, this is my "meditation". Just remember, my 86 year old dad has told me so many times, "it's just metal, if you don't like what you did, cut it out and do it again." In fact, some of the guys on this forum have told me the same thing. There are different "fillers". I'm going to use Evercoat Quantum 1 for a finish filler, and Evercoat Everglass as the "filler" for the larger spots. I've been researching them and they seem to be pretty good. Also, remember to prime before filler. Filler will trap water. Just a thought. Keep up the good work.