The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Broken65 · 10-23-2018, 11:45 PM

It took a while due to working on multiple issues, I'm just getting back to this after having the carb rebuilt.

I do have gauges. The second picture is the wiring I have, though I've never seen that diagram.

I notice the b/w wire from the forward harness to the horn relay "BAT" tab. I don't have that on the truck and didn't know it needed one. I did discover the b/w inside the cab and it is correct until it reaches the forward harness. So I'll add that tomorrow..

I have another question about the voltage regulator. There is the F #2 #3 and #4 tabs, but what is the side tab for??

Thanks for the help so far!

10-23-2018, 11:45 PM	#8
Broken65 Registered User Join Date: Oct 2018 Location: Orlando, Fla Posts: 6	Re: gen light It took a while due to working on multiple issues, I'm just getting back to this after having the carb rebuilt. I do have gauges. The second picture is the wiring I have, though I've never seen that diagram. I notice the b/w wire from the forward harness to the horn relay "BAT" tab. I don't have that on the truck and didn't know it needed one. I did discover the b/w inside the cab and it is correct until it reaches the forward harness. So I'll add that tomorrow.. I have another question about the voltage regulator. There is the F #2 #3 and #4 tabs, but what is the side tab for?? Thanks for the help so far!