Quote:
Originally Posted by Andy4639
There should be a rubber connector in the radiator support above the light housing. When you pull it a part there should be 3 wires connectors inside it. Take it loose and put a test light in each fitting and do your lights to see if it's getting juice to the light fixture. If it does then it's more than likely a grounding issue at the housing. The ground is through the light housing. 
|
I have checked the ground in the light fixture several times and I get good voltage from both turn signals (around 9-10 volts). I have also run a ground wire from the negative battery post to the housing just to confirm, and there hasn't been any change in the symptoms.
Keep throwing ideas at me, I am willing to try nearly anything!