|
Re: LT1 GenV swap
Installed
.06" gap with no gaskets installed. Add the 2 gaskets add another .070".. Plenty.. the Dirty Dingo adapters were thicker and the belt was a pretty close to the edge of the pulley, it would work but these are as close as I wanted it to get, which will put the belt more centered/away from the edge of the pulley.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|