The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**landarts** · 01-19-2018, 07:52 PM

Spent some time this afternoon trying to finish off the door so I can get paint on it. Sand, prime, fill, and repeat....while primer was drying I was able to finish sanding down the front bumper, next in line for a little primer and paint after I fix one little bend on the bottom side. Was going to try a little heat and some hammer and dolly to get it back where it needs to go. Pushing to get paint this weekend wrapped up on floor, rockers and bottom of passenger door. If I can get this done I will start on assembly middle of the week and get a few of the new parts on like the new radiator and fuel 3-way control valve.

01-19-2018, 07:52 PM	#54
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,334	Re: Fix and Sale 72 GMC 3/4 ton 4x4 K2500 Spent some time this afternoon trying to finish off the door so I can get paint on it. Sand, prime, fill, and repeat....while primer was drying I was able to finish sanding down the front bumper, next in line for a little primer and paint after I fix one little bend on the bottom side. Was going to try a little heat and some hammer and dolly to get it back where it needs to go. Pushing to get paint this weekend wrapped up on floor, rockers and bottom of passenger door. If I can get this done I will start on assembly middle of the week and get a few of the new parts on like the new radiator and fuel 3-way control valve. Attached Images __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer Last edited by landarts; 01-21-2018 at 10:54 AM.