The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Cut wires on door

62step · 09-26-2018, 09:53 PM

The timing was checked 4 times by myself and a friend of mine. No fuel at injectors. Buddy said it was running one day and all of a sudden it shut off wouldn't come back. Put a fuel pump in it and it worked for about a week then it stopped again and wouldn't start. Put another new one and nothing.

The bed is unbolted so I might try and tackle the pump this weekend, but I did a compression test and it read 90psi with oil in it... so I'm thinking the rings busted when I broke loose the engine or something. I would think with at least that much psi it would try to start since it had spark and fuel (from throttle with starting fluid).

09-26-2018, 09:53 PM	#8
62step Registered User Join Date: Jan 2014 Location: Rock Hill SC Posts: 156	Re: Cut wires on door - 1992 c1500 The timing was checked 4 times by myself and a friend of mine. No fuel at injectors. Buddy said it was running one day and all of a sudden it shut off wouldn't come back. Put a fuel pump in it and it worked for about a week then it stopped again and wouldn't start. Put another new one and nothing. The bed is unbolted so I might try and tackle the pump this weekend, but I did a compression test and it read 90psi with oil in it... so I'm thinking the rings busted when I broke loose the engine or something. I would think with at least that much psi it would try to start since it had spark and fuel (from throttle with starting fluid).