View Single Post
Old 03-14-2014, 10:38 AM   #51
dec010974
Registered User
 
dec010974's Avatar
 
Join Date: Oct 2012
Location: Miami, Florida
Posts: 905
Re: Porterbuilt Stage 1 Front and Rear Kit Chart

muckyp, I had clearance issues with the lower control rubbing/interfering the inner rally wheels and wheel balance weights. I also had to clearance/grind the tie rod area of the drop spindle. For my application, a grinder was my best tool until I decide to buy larger wheels. Im running my stock rally wheels which are 15x8. I used the belltech 3 inch drop spindle, stock lower control arms, & the air bag in the lower control spring pocket. I also used a PB stage 1 lowering kit which relocated the shock mounts. i hope this helps.
dec010974 is offline