Re: uni vs. standard points?
L6 or V8? With a V8 you have to use an allen key thru a trapdoor in the side of the Distributor. On the L6 you have to use 2 flathead screwdrivers, and open the gap with one while you tighten the set screw with the other. Get it in the neighborhood with a matchbook cover, then tweak to fit a gap gauge. [.019 New and .016 used]
If you're tuning an L6 with a dwell-meter, you have to open up the Distributor Cap and lift off the Rotor then reset gap for best dwell angle. With the V8 you can fine-tune it while running with the allen key.
Standard and their premium line Blue Streak were very good F.L.A.P. parts in their day.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not.
|