[Dieselwrencher]

Thanks! Yeah, I did set it in pretty low, but that is because I wanted plenty of clearance for exhaust and around the firewall for the bell housing. My biggest intent for setting it so low is I plan on putting a P-pumped 24v with twin turbos in it before spring. It is in my friend's truck right now until he gets his newly rebuilt 12v fixed. The color is actually chevy orange. It was pretty funny last weekend I had a couple of guys ask what 6 cylinder it was because it was so dang big. As for the water inlet, I have an industrial one that points down going straight out forward of the engine. I have some elbows I am going to weld to it and I have a formed hose that will connect to the radiator. The radiator is another issue. I only have 4 core radiators for 73-87's, and they are too tall to fit right in the 67-72 supports. However, I did set one in there and the hood will shut, so I'm thinking about modifying the stock 4 core mounts to use the later radiator. I have been searching for a stock 4 core with no luck, and don't really have the extra cash to buy one right now. I have to decide how bad I want a D80 in the rear of this, and I'm really leaning on going that direction.