Re: Mieser's 71 Short Wide Project
I did have a question regarding the routing of the fuel line. The new tank hangs down quite a bit and the inlet for the fuel line is on the bottom right front corner. Will I have any problems with fuel flow seeing as how I'll have to route my fuel line up vertically several inches to be able to tie it to the frame? I was planning on running a 90 degree bend up from the inlet with the fuel line and then running another 90 degree bend to the right to get the fuel line to the frame. Any problems with running that many bends or should I minimize the number of 90's I'm running? At this point I don't plan on running an electric fuel pump.....but will if I need to I guess.
|