Quote:
Originally Posted by Bigdav160
I believe pwdcougar was doing a similar swap.
IIRC, a couple body mounts were in different positions
|
great lead, thank you! I actually talked to Paul a couple of weeks ago for about an hour and he gave me a boat load of info too..
Quote:
Originally Posted by olblue60@aol.com
I did that swap on my 67 panel.I used a 72 suburban chassis, Its a direct bolt in.
|
thank you!
Quote:
Originally Posted by scotto0609
Did the same swap 67 panel to 69 4wd sub. Direct swap except for hump.
|
thank you!
Quote:
Originally Posted by CG
Ive been kicking this around myself. I have the two wheel drive panel and the 4 wheel drive burb. Easy swap (relatively). I don't know the weight on these, but way back when we took the panel body off of its chassis I believe there were six of us. Its pretty dang heavy.
|
thank you! sounds like it's gonna cost me a little more beer than I originally thought..
my friends are cheep but put a few of them together and get ready to
I have moved on to a much better complete suburban to move forward with my current project.. mostly just edge and surface rust.. much more repairable than the giant panel losses in the blue one..
but still considering a long term search for a donor for 'ol rusty blue to make it more marketable or keep [shhh, don't tell Mrs. Bee]