The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LS short box · 02-24-2021, 06:40 PM

On my 68 LS swapped C10 I mounted the ECM and relays behind the glove box. I had to section the glove box liner to make room. Then ran the wire loom for the engine under the heater box.
On a Camaro L92 swap I did a DBC throttle body from Holley. ECM and programming was from Howell. It worked well.
On a friends LS swap he used a LS3 intake and Corvette throttle body DBW. He used Speartech and it worked well.
To each his own.

02-24-2021, 06:40 PM	#7
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 1,922	Re: LY6/TR6060 Swap from a 5.3/4L60E On my 68 LS swapped C10 I mounted the ECM and relays behind the glove box. I had to section the glove box liner to make room. Then ran the wire loom for the engine under the heater box. On a Camaro L92 swap I did a DBC throttle body from Holley. ECM and programming was from Howell. It worked well. On a friends LS swap he used a LS3 intake and Corvette throttle body DBW. He used Speartech and it worked well. To each his own.