The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Matt_50 · 10-12-2017, 09:37 AM

Thanks guys. I hope it goes nice and smooth. I plan to put the engine and trans in as a unit... figured it would be better that way.

So 1/2 inch between distributor and firewall and that should be enough to pull it if needed?

I know it'll be a tight fit... Will my stock exhaust manifolds from my c10 donor be an issue? Keep in mind I'm not using original steering. How about my water pump and fan, need to be changed?

10-12-2017, 09:37 AM	#21
Matt_50 Registered User Join Date: Jul 2017 Location: Joshua, Texas. Posts: 1,303	Re: Tubular engine mount crossmember?? Thanks guys. I hope it goes nice and smooth. I plan to put the engine and trans in as a unit... figured it would be better that way. So 1/2 inch between distributor and firewall and that should be enough to pull it if needed? I know it'll be a tight fit... Will my stock exhaust manifolds from my c10 donor be an issue? Keep in mind I'm not using original steering. How about my water pump and fan, need to be changed?