View Single Post
Old 08-22-2017, 03:44 PM   #10
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,680
Re: 58 modified which radiator hoses?

Quote:
Originally Posted by jkmhb View Post
The thermostat housing I used comes out at about a 45 degree angle towards the driver's side. I also have a Champion Aluminum Radiator.
If the radiator inlet is on the drivers side look at a 70 Z-28 hose. That is what I used for my 64 Chevelle when I upgraded the radiator. The Z-28 t stat housing points like your. On my truck I used the coat hanger method. Here are the numbers I used, lower might work for you.

A member asked what radiator hoses I used. The upper is a Gates 20416, I had to shorten the end that goes on the radiator. The lower is a Gates 20584, I had to shorten the radiator end on it too. The applications are not GM, I took in a bent wire and diameters. I got them at OReilys.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote