The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

thomasrepair · 10-10-2017, 08:27 AM

I only knew of the one brake light wire. Its lite blue and comes from pin 6 at the tach module and is connected to the cold side of the switch. All the harness wires were tagged and accounted for. I have verified ground ay the switch back through the brake light bulbs and also by wiring in a tempoary 3rd brake light.

10-10-2017, 08:27 AM	#35
thomasrepair Registered User Join Date: Apr 2017 Location: Billings, MT Posts: 18	Re: DBW Cruise Issue I only knew of the one brake light wire. Its lite blue and comes from pin 6 at the tach module and is connected to the cold side of the switch. All the harness wires were tagged and accounted for. I have verified ground ay the switch back through the brake light bulbs and also by wiring in a tempoary 3rd brake light.