|
Re: Tuning carb with a Vacuum Gauge
Hei plus gap needs to be .045. Vacuum at18hg aint bad at all. Where is your timing set at? Are you using a vacuum advance? As mentioned you CANNOT use the factory coil wire to power and hei. You need to run a new 12 gaage wire from and ignition source on the fuse block.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
|