The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**VetteVet** · 07-10-2018, 01:04 PM

I dis-assembled all the wires to that soldered junction and attached them to a terminal strip, then I used jumpers to power the wires to each load.

Here's a picture
.

Name: temperature gauge 005.jpg
Views: 128
Size: 71.9 KB

Name: temperature gauge 005.jpg
Views: 128
Size: 71.9 KB

I haven't completed it yet, still have to wire the cooling fan and a few things to clean up the wiring.

I decided that you will be OK with the relay breakers if you shut the headlight switch off as soon as they start breaking.

07-10-2018, 01:04 PM	#8
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,704	Re: Headlight Relay Upgarde Question I dis-assembled all the wires to that soldered junction and attached them to a terminal strip, then I used jumpers to power the wires to each load. Here's a picture . I haven't completed it yet, still have to wire the cooling fan and a few things to clean up the wiring. I decided that you will be OK with the relay breakers if you shut the headlight switch off as soon as they start breaking. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.