The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - car alternators

sprint_9 · 03-09-2018, 08:03 PM

Depending on what you have you might be able to change the plug in order to work with the alternator you want. You might be farther ahead to research if that can be done instead.

Another option is to cut the frame and make the alternator you want fit, I have a Holley bracket that didnt fit, I cut a half inch off of the frame and never looked back.

If the GTO is the same as the LS1 Camaro then it should fit as I think I have seen trucks with that accessory drive setup.

03-09-2018, 08:03 PM	#2
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: car alternators - mounted on truck brackets Depending on what you have you might be able to change the plug in order to work with the alternator you want. You might be farther ahead to research if that can be done instead. Another option is to cut the frame and make the alternator you want fit, I have a Holley bracket that didnt fit, I cut a half inch off of the frame and never looked back. If the GTO is the same as the LS1 Camaro then it should fit as I think I have seen trucks with that accessory drive setup.