The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - I Traded some Work & Ingersoll 4018 - Chevy 1954

Port&PolishMan · 04-10-2017, 08:04 AM

Those Little Tractor - are Simple to work on and Big Time Workers
Kinda like an Allmand or a Termite .

My Needs have Changed and I Guess so did the Owner of Truck ..

I'm Hoping I have the Oil Seepage or Oil Being Pushed ( Cured )

Only Time will tell ..

Second Issue on Engine is High Oil Pressure ?
Yes that can and sometimes is an Issue !

I have Actually Cut Oil Filters Apart to look at _ OIL - BY PASS set up
as I have seen some of these Dam things - Just - By Pass Filter Media
so NO FILTERING is actually happening ..

Some Oil Filters only take 5-7 Gallons a Min. / Others may take 12 Gallons
Min. ( Before By Pass is Triggered )

Study I did were Hydraulic Filters - as those Drove and Worked - Tractors.
I have Not done any on Automotive !

Engine Builders - Whats the Best Oil Filter - when Running High Flow - High Pressure Oil Pumps ?

04-10-2017, 08:04 AM	#6
Port&PolishMan Registered User Join Date: Mar 2017 Location: Etowah, TN Posts: 210	Re: I Traded some Work & Ingersoll 4018 - Chevy 1954 - 3800 Those Little Tractor - are Simple to work on and Big Time Workers Kinda like an Allmand or a Termite . My Needs have Changed and I Guess so did the Owner of Truck .. I'm Hoping I have the Oil Seepage or Oil Being Pushed ( Cured ) Only Time will tell .. Second Issue on Engine is High Oil Pressure ? Yes that can and sometimes is an Issue ! I have Actually Cut Oil Filters Apart to look at _ OIL - BY PASS set up as I have seen some of these Dam things - Just - By Pass Filter Media so NO FILTERING is actually happening .. Some Oil Filters only take 5-7 Gallons a Min. / Others may take 12 Gallons Min. ( Before By Pass is Triggered ) Study I did were Hydraulic Filters - as those Drove and Worked - Tractors. I have Not done any on Automotive ! *Engine Builders - Whats the Best Oil Filter - when Running High Flow - High Pressure Oil Pumps* ?