Re: My LQ4/T56 build thread
Update on windshield removal
Good news: method mentioned above works and definitely can be done without breaking glass. Just use garden hose for top between rubber lip seal and metal windshield frame. Use something smaller for the sides in the same fashion. The key is PATIENCE and WD40. You will find after multiple attempts that all a sudden the seal will start to work with you and not against you. At that point, don't rush it, just stay the course and gently push from inside at top corners and a little bit inwardtowards the center also and it will "pop" out.
Bad news: I cracked my windshield
Good news: I can really go after it now with the sandblaster
Bad news: I cracked my windshield
Basically, my screwdriver tapped the glass accidentally. Definitely would all have worked out had I not slipped up there. I'm not going to dwell on this, moving on.
|