[rob32472]

I finished my install yesterday..... I left the camera at the shop so it my be later in the week on pics. I installed this kit with an ls swap so the upper shaft needed to be a little longer. I called unisteer and they sent one right out. The only other modification I had to do was cut the shaft support bracket, reposition to clear headers and reweld. That way I could bolt it to the top of the motor mount just like they intended. I can return the truck back to original at any time by simply bolting the old stuff back on. The steering is very nice with a new car feel, at least in the short trip around the block I took. By far the easiest "bolt on kit" I have done on these old trucks